ThermalCapture 2.0 INS Upgrade – Getting Started

Posted by: TeAx Categories: Did you know - Useful facts, Technical Update

ThermalCapture 2.0 INS Upgrade – Getting Started On this page you can find all you need for getting started with our ThermalCapture 2.0 INS upgrade package. In order to correctly parse recorded data, please make sure that you are using the latest version of ThermoViewer. Preparations The hardware will arrive like this: Remove ..

7May.

ThermalCapture Calibrator Vue Pro Edition – Getting Started

Posted by: TeAx Categories: Did you know - Useful facts, Technical Update

ThermalCapture Calibrator Vue Pro Edition – Getting Started On this page you can find all you need for getting started with our ThermalCapture Calibrator module. Assembly This is a two stage process. First you have to disassemble the FLIR Vue Pro hardware from the FLIR Tau core, which is the base element of ..

13Feb.

ThermalCapture Grabber USB – Getting Started

Posted by: TeAx Categories: Did you know - Useful facts, Technical Update

ThermalCapture Grabber USB – Getting Started On this page you can find all you need for getting started with our ThermalCapture Grabber USB module. User manual for ThermalCapture Grabber USB can be found here. If you have the OEM version and want to attach the module to an existing FLIR Tau 2 Core, please ..

21Nov.

ThermalCapture MiniAV – Getting Started

Posted by: TeAx Categories: Did you know - Useful facts, Technical Update

ThermalCapture MiniAV – Getting Started On this page you can find all you need for getting started with our ThermalCapture MiniAV module. User manual for ThermalCapture MiniAV can be found here. The module has a 6-pin JST connector. Occupancy of the connector is as follows: Video GND Analog Video output (NTSC, PAL) Serial RX ..

23Oct.

ThermalCapture Calibrator – Getting Started

Posted by: TeAx Categories: Did you know - Useful facts, Technical Update

On this page you will find all needed information to get started with your ThermalCapture Calibrator device. Hardware installation is straight forward for this combination. First remove any lens lock nuts from the FLIR Tau 2 Core, if there are any. After that push ThermalCapture Calibrator from the front over the FLIR Tau 2 ..