Frequently Asked Question
Could you record at a slower rate, and can you record based on an external trigger?
Last Updated 5 years ago
Yes, both is possible. We do have a trigger input and you can configure the device to skip frames from recording.
External trigger can be a switching signal (0V - 3.3V), PWM, PPM or SBUS signal.
Frame skip can be configured using ThermalCapture Configurator. Go to the "Recording Options" tab and enter the number of frames that should be skipped while recording. (Example: Value set to 5 => 1 frame gets recorded, the next 5 frames are skipped, 1 frame gets recorded, 5 frames get skipped, and so on)
External trigger can be a switching signal (0V - 3.3V), PWM, PPM or SBUS signal.
Frame skip can be configured using ThermalCapture Configurator. Go to the "Recording Options" tab and enter the number of frames that should be skipped while recording. (Example: Value set to 5 => 1 frame gets recorded, the next 5 frames are skipped, 1 frame gets recorded, 5 frames get skipped, and so on)